Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Pressure suit: Difference between revisions

From Battlestar Wiki, the free, open content Battlestar Galactica encyclopedia and episode guide
Joe Beaudoin Jr. (talk | contribs)
m Text replacement - "<gallery>" to "<gallery mode="slideshow" widths=1000 heights=500>"
Joe Beaudoin Jr. (talk | contribs)
m Text replacement - " widths=1000 heights=500" to ""
Line 9: Line 9:
== Related Imagery ==
== Related Imagery ==


<gallery mode="slideshow" widths=1000 heights=500>
<gallery mode="slideshow">
LPOG1 - Leg Circuit Board and Wires.png|A small circuit board with two wires leading outward is affixed to a black band above the wearer's right knee.
LPOG1 - Leg Circuit Board and Wires.png|A small circuit board with two wires leading outward is affixed to a black band above the wearer's right knee.
LPOG1 - Pressure Suit Torso Detail.png|Black wires and black sections of the pressure suit. Note the silver detail running on the wearer's mid-right of the sternum plate.
LPOG1 - Pressure Suit Torso Detail.png|Black wires and black sections of the pressure suit. Note the silver detail running on the wearer's mid-right of the sternum plate.

Revision as of 19:34, 17 January 2021


Viper trainees in pressure suits (TOS: "Lost Planet of the Gods, Part I").

A pressure suit, worn beneath the Colonial Warrior uniform, allows a pilot to survive the g-forces that can be achieved by flying a Viper (TOS: "Lost Planet of the Gods, Part I").

Single black wires connect between the black bands of the beige jumpsuit, and a small circuit board with two wires is attached to the black band above the right kneecap. Presumably the circuit board connects to the leg computer on the outside of the Warrior's uniform.

Related Imagery

Notes