Toggle menu
Toggle preferences menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Pressure suit: Difference between revisions

From the only original and legitimate Battlestar Wiki: the free-as-in-beer, non-corporate, open-content encyclopedia, analytical reference, and episode guide on all things Battlestar Galactica. Accept neither subpar substitutes nor subpar clones.
Joe Beaudoin Jr. (talk | contribs)
m Text replacement - "\(\[\[TOS\]\]\: \"\[\[([A-Za-z0-9_, ()]*)\]\]\"\)" to "{{OS|$1}}"
Joe Beaudoin Jr. (talk | contribs)
m Text replacement - "^:''+(.*)''" to "{{disline|$1}} "
Line 1: Line 1:
:''For information on the pilot pressure suits used in the [[Re-imagined Series]], see [[Flight suit]].''
{{disline|For information on the pilot pressure suits used in the [[Re-imagined Series]], see [[Flight suit]].}}
 


[[Image:LPOG1 - Pressure Suits.png|thumb|right|Viper trainees in pressure suits {{OS|Lost Planet of the Gods, Part I}}.]]
[[Image:LPOG1 - Pressure Suits.png|thumb|right|Viper trainees in pressure suits {{OS|Lost Planet of the Gods, Part I}}.]]

Revision as of 18:53, 10 January 2021


Viper trainees in pressure suits (TOS: "Lost Planet of the Gods, Part I").

A pressure suit, worn beneath the Colonial Warrior uniform, allows a pilot to survive the g-forces that can be achieved by flying a Viper (TOS: "Lost Planet of the Gods, Part I").

Single black wires connect between the black bands of the beige jumpsuit, and a small circuit board with two wires is attached to the black band above the right kneecap. Presumably the circuit board connects to the leg computer on the outside of the Warrior's uniform.

Notes